Holooly Plus Logo
Holooly Plus Logo

Question 24.4: Determine the eigenvalues/eigenvectors of a matrix A given a......

Determine the eigenvalues/eigenvectors of a matrix A given as

A = \left[\begin{aligned}0&&1 \\0&&-1\end{aligned}\right]

Step-by-Step
The 'Blue Check Mark' means that this solution was answered by an expert.
Learn more on how do we answer questions.
Report Answer

>> [V,D] = eig(A)

Eigenvector is

1   -0.70711

0 0.70711

Eigenvalues are

D=

0   0

0   -1

Related Answered Questions

Question: 24.10

A stepped cantilever beam and loading is shown in the figure below. determine (a) the slope and (b) the vertical deflector at the free end. ...

Verified Answer:

Two-element FE model is shown below. The connectiv...
Question: 24.9

Solve the two-dimensional loaded plate using the CST element. Determine the displacements and element stresses. Assume plane stress condition. ...

Verified Answer:

Considering two CST elements, the finite element m...
Question: 24.5

The state of stress is given by matrix S as S = [80 -60 0 -60 -40 0 0 0 40] The direction cosine matrix is given as T = [0.866 0.5 0 -0.5 0.866 0 0 0 1] Determine the stress tensor with respect to new coordinates. ...

Verified Answer:

>> S= [80 -60 0; -60 -40 0; 0 0 40]; T=[0.86...
Question: 24.2

Given A = [1 3 10 2 3 6 4 6 8] and b = [10; 12; 20] Find the x vector. ...

Verified Answer:

>> A= [1 3 10; 2 3 6; 4 6 8]; b=[10; 12; 20]...
Question: 24.11

Determine the angle of twist at the step, the maximum shear stress in each section and the torque at the end of the stepped shaft as shown below. ...

Verified Answer:

The FE model is shown in the figure below. F is th...
Question: 24.8

Consider a steel plate (E = 200 GPa) as shown in the figure. A point force is applied at the free end. (a) Model the plate with two finite elements. (b) Determine the stiffness matrix and evaluate stress at each element. ...

Verified Answer:

Consider two elements each of length 120 mm. The f...
Question: 24.7

Drawing of a cylinder. ...

Verified Answer:

Command: CYLINDER Current wireframe density: ISOLI...
Question: 24.6

Discuss how a cone is drawn. ...

Verified Answer:

Drawing a cone is the same as drawing a cylinder, ...
Question: 24.3

Solve the displacement fields u if the stiffness and force matrix is given as ...

Verified Answer:

>> k=2e05*[0.4375 -0.4335 0; -0.4375 0.755 -...
Question: 24.1

In each case find the value of the expression in MATLAB and explain precisely the order in which the calculation was performed. (i) -2^3+9 (ii) 2/3*3 (iii) 3*2/2 (iv) 3*4-5^2*2-3 (V) (2/3^2*5)*(3-4^2)^2 (vi) 3*(3*4-2*5^2-3) ...

Verified Answer:

(i) ans= 1 (ii) ans= 2 (iii) ans= 3 (iv) ans= -41 ...