Question 24.7: Drawing of a cylinder....

Machine Design [1014292]

Drawing of a cylinder.

Step-by-Step

The 'Blue Check Mark' means that this solution was answered by an expert.
Learn more on how do we answer questions.

Command: CYLINDER
Current wireframe density: ISOLINES=4
Specify centre point for base of cylinder or [Elliptical] <0,0,0>:
Diameter/<Radius>: 6
Centre of other end/<Height>: 4
Command: CYLINDER
Current wireframe density: ISOLINES=4
Specify centre point for base of cylinder or [Elliptical] <0,0,0>:
Specify radius for base of cylinder or [Diameter]: D
Diameter: 12
Specify height of cylinder or [Centre of other end]: 4

Capture

Related Answered Questions

Question: 24.10

A stepped cantilever beam and loading is shown in the figure below. determine (a) the slope and (b) the vertical deflector at the free end. ...

Verified Answer:

Two-element FE model is shown below. The connectiv...

Question: 24.9

Solve the two-dimensional loaded plate using the CST element. Determine the displacements and element stresses. Assume plane stress condition. ...

Verified Answer:

Considering two CST elements, the finite element m...

Question: 24.5

The state of stress is given by matrix S as S = [80 -60 0 -60 -40 0 0 0 40] The direction cosine matrix is given as T = [0.866 0.5 0 -0.5 0.866 0 0 0 1] Determine the stress tensor with respect to new coordinates. ...

Verified Answer:

>> S= [80 -60 0; -60 -40 0; 0 0 40]; T=[0.86...

Question: 24.4

Determine the eigenvalues/eigenvectors of a matrix A given as A = [0 1 0 -1] ...

Verified Answer:

>> [V,D] = eig(A) Eigenvector is 1 -0.7071...

Question: 24.2

Given A = [1 3 10 2 3 6 4 6 8] and b = [10; 12; 20] Find the x vector. ...

Verified Answer:

>> A= [1 3 10; 2 3 6; 4 6 8]; b=[10; 12; 20]...

Question: 24.11

Determine the angle of twist at the step, the maximum shear stress in each section and the torque at the end of the stepped shaft as shown below. ...

Verified Answer:

The FE model is shown in the figure below. F is th...

Question: 24.8

Consider a steel plate (E = 200 GPa) as shown in the figure. A point force is applied at the free end. (a) Model the plate with two finite elements. (b) Determine the stiffness matrix and evaluate stress at each element. ...

Verified Answer:

Consider two elements each of length 120 mm. The f...

Question: 24.6

Discuss how a cone is drawn. ...

Verified Answer:

Drawing a cone is the same as drawing a cylinder, ...

Question: 24.3

Solve the displacement fields u if the stiffness and force matrix is given as ...

Verified Answer:

>> k=2e05*[0.4375 -0.4335 0; -0.4375 0.755 -...

Question: 24.1

In each case find the value of the expression in MATLAB and explain precisely the order in which the calculation was performed. (i) -2^3+9 (ii) 2/33 (iii) 32/2 (iv) 34-5^22-3 (V) (2/3^25)(3-4^2)^2 (vi) 3(34-2*5^2-3) ...

Verified Answer:

(i) ans= 1 (ii) ans= 2 (iii) ans= 3 (iv) ans= -41 ...