Question 7.SP.1: A time study analyst timed an assembly operation for 30 cycl...

Operations Management [1005877]
Operations Management

A time study analyst timed an assembly operation for 30 cycles, and then computed the average time per cycle, which was 18.75 minutes. The analyst assigned a performance rating of .96, and decided that an appropriate allowance was 15 percent. Assume the allowance factor is based on the workday. Determine the following: the observed time (OT), the normal time (NT), and the standard time (ST).

The "Step-by-Step Explanation" refers to a detailed and sequential breakdown of the solution or reasoning behind the answer. This comprehensive explanation walks through each step of the answer, offering you clarity and understanding.
Our explanations are based on the best information we have, but they may not always be right or fit every situation.

The blue check mark means that this solution has been answered and checked by an expert. This guarantees that the final answer is accurate.
Learn more on how we answer questions.

This Question has been Answered.

Already have an account?

Related Answered Questions

Question: 7.SP.4

Compute the standard deviation of this data: 3 2 4 1 ...

Verified Answer:

Step 1: Find the mean of the data. Step 2: Subtrac...

Question: 7.3

Computing a Time Standard A time study of an assembly operation yielded the following observed times for one element of the job, for which the analyst gave a performance rating of 1.13. Using an allowance of 20 percent of job time, determine the appropriate standard time for this operation. ...

Verified Answer:

1. OT =

\frac{\sum{x_{i}}}{n} = \frac{10.35...

Question: 7.SP.3

Work sampling. An analyst has been asked to prepare an estimate of the proportion of time that a turret lathe operator spends adjusting the machine, with a 90 percent confidence level. Based on previous experience, the analyst believes the proportion will be approximately 30 percent. a. If the ...

Verified Answer:

e = z \sqrt{\frac{\hat{p}(1 - \hat{p})}{n...

Question: 7.SP.2

A time study analyst wants to estimate the number of observations that will be needed to achieve a specified maximum error, with a confidence of 95.5 percent. A preliminary study yielded a mean of 5.2 minutes and a standard deviation of 1.1 minutes. Determine the total number of observations needed ...

Verified Answer:

a. A maximum error of ± 6 percent of the sample me...

Question: 7.4

Computing a Sample Size for Work Sampling The manager of a small supermarket chain wants to estimate the proportion of time stock clerks spend making price changes on previously marked merchandise. The manager wants a 98 percent confidence that the resulting estimate will be within 5 percent of the ...

Verified Answer:

z = 2.33, e = .05,

\hat{p}

is unkno...

Question: 7.2

Computing Allowance Factors Compute the allowance factor for these two cases: a. The allowance is 20 percent of job time. b. The allowance is 20 percent of work time. ...

Verified Answer:

A = .20 a. AF = 1 + A = 1.20, or 120% AF =

...

Question: 7.1

Determining Number of Observations Needed in a time Study A time study analyst wants to estimate the time required to perform a certain job. A preliminary study yielded a mean of 6.4 minutes and a standard deviation of 2.1 minutes. The desired confidence is 95 percent. How many observations will he ...

Verified Answer:

a.

\begin{aligned} s = 2.1 minutes ...